 |
|
|
 |
|
|
 |
|
|
|
|
 |
|
Marble & Lacquer Care
For proper care and maintenance of your marble and lacquer furniture,
follow the tips below:
Sealed Marble Care (shiny, polyurethane/polyester coated)
Unsealed MarbleCare (natural state, uncoated)Lacquer Care
Sealed Marble Care (shiny, polyurethane/polyester coated)
| - |
Wipe the poly finish with a solution of warm water and mild soap. |
| - |
Water or spills will not affect the finish unless it is left uncleaned. |
| - |
Do not put a porous pot or planter on the finish for any length of time. It can release moisture, causing the finish to lift and peel. |
Back to Top
Unsealed MarbleCare(natural state, uncoated)
| - |
Immediately upon receipt of this marble, apply a coat of paste wax to seal and protect the surface. This will fill small holes and repel liquids. Never leave anything wet for any length of time on marble furniture. Keep it well waxed, as you would any fine piece of wood furniture. |
| - |
The removal of light rings and slight stains is a simple procedure. If you think it's a surface stain, with a light-handed application try the finest sandpaper (600 grit or finer) available. Then add a small amount of either hydrogen peroxide, diluted bleach, or ammonia to the stain with a soft cloth. Always wash with clear water, wipe with a dry cloth, and re-wax after any cleaning or repair. |
Lacquer Care
- Lacquer (polyester poured finish) can be cleaned with glass cleaner and a soft cloth.
Back to Top
|
|
|
|
 |
|
|
